Gun case foam inserts are pre-cut, pluck-and-pull polyethylene sheets sized for pistol and rifle cases. Each insert protects firearms from impact and vibration during storage and transport. The Ragar XP option resets and reuses without permanent cuts. Available in pistol, rifle, and universal sizes — so the right foam for your gun case is always in stock.
Custom Gun Case Foam — Pluck-and-Pull, Precut & Reusable Inserts
The right gun case foam turns a generic hard case into a custom-fit firearm vault. We offer three foam categories: factory pluck-and-pull foam for DIY shapers, custom precut foam inserts for gun cases for shooters who want to skip the cutting, and Ragar XP reconfigurable foam for those who change loadouts often.
Pistol & Rifle Case Foam Inserts
Our gun case foam inserts are engineered for both handguns and long guns. Pistol case foam is available in pluck-and-pull and custom precut formats sized for compact, full-size, and competition handguns — a proper foam for pistol case cushions the frame, barrel, and magazine without shifting during transport. Need a gun case foam insert for a rifle? From single-gun cradles to 5-gun Recon Rack EVA inserts, our rifle case foam ships sized for standard rifle-case interior dimensions. Gun safe foam strips and pads are also available for secure at-home storage.
Custom Foam Inserts for Gun Cases
Our custom gun case foam inserts are precut at the factory to specific firearm and magazine layouts — drop them into the matching hard case and you're range-ready out of the box. Available in 13", 16", 20", and longer rifle-case sizes with cradles for 3-, 4-, 5-, 6-, or 8-gun configurations plus magazine and accessory pockets.
Pluck-and-Pull Foam — DIY Custom Cuts
The standard 3-layer foam set included with our hard cases is pluck-and-pull foam: a cubed top layer you press out to shape an exact pocket for your firearm, a solid bottom pad for impact absorption, and an egg-crate top pad for vibration damping. Press out the cubes you don't need to fit your specific gun, optic, magazine, and accessories. How to cut gun case foam: simply press or trim the pre-scored cubes — no tools required for basic shapes.
Ragar XP — Reconfigurable, Reusable Foam
Standard pluck foam compresses permanently after a few firearms cycle through it. Ragar XP crosslinked foam returns to its original shape every time, so the same foam gun insert reshapes for a hunting rifle today, an AR-10 tomorrow, a precision long gun next month — without buying replacement gun case foam every season. Available standalone and pre-installed in select rifle cases.
Replacement & Custom Foam for Rifle Cases
Worn pluck foam, an accidental over-pluck, or a new firearm that requires a fresh layout? Our replacement foam for rifle case sets ship factory-cut to fit specific case sizes. Drop in, pluck for the new firearm, and you're done. A quality gun case foam replacement restores full protection without needing a new case. Need something truly one-of-a-kind? Our custom gun case foam options — pluck-and-pull or precut — let you configure pockets for any firearm, optic, or accessory combination.
- What thickness is the foam?
- Our pluck-and-pull sets use a multi-layer system: a cubed pick-and-pluck top layer plus a solid base pad, giving protective depth sized for the corresponding case. Custom precut inserts match the interior depth of each specific case model in the catalog.
- Can I cut it to fit my rifle case?
- Yes. Every pluck-and-pull insert is pre-scored so you press out cubes by hand — no knife needed for standard rifle and pistol outlines. For more complex cuts, a utility knife follows the scored grid cleanly. This makes our foam true custom gun case foam you shape yourself.
- Is replacement foam available for all Eylar case sizes?
- Replacement and custom foam inserts for cases are stocked for the most popular pistol-case and rifle-case sizes in the Eylar catalog. Check the individual product listings for compatibility; if your size is listed, a drop-in replacement set ships ready to pluck.
Foam Inserts for Bow & Archery Cases
Looking for a vault bow case insert or foam to protect archery gear inside a hard case? Our pluck-and-pull foam inserts for cases are fully customizable — press out cubes to carve shaped pockets for a compound or recurve bow, individual arrows, a release aid, and accessories, all within one protective hard-shell vault. The same case foam inserts that work for firearms adapt to bows and archery equipment because the pluck-grid system accommodates any irregular shape. Whether you're protecting a competition bow or a hunting setup, our foam for cases gives you a custom-fit solution without specialty tooling.
Foam Inserts for Cases — Full Size Range
From a single foam insert for a hard case to multi-gun EVA sets, our foam inserts for cases cover the full size range in the catalog — precut or pluck-and-pull. Available as customizable case foam inserts for compact range bags or oversize transport cases. We also stock gun safe foam strips and pads for secure at-home storage. Whether you call it guncase foam, foam for hard cases, or simply case foam, the right insert ships ready to customize.
Customizable Gun Case Foam
Every foam format in our catalog is customizable gun case foam — pluck-and-pull cubes let you shape pockets by hand, precut inserts drop in ready to go, and Ragar XP resets after every loadout change. From foam for a pistol case to oversized rifle transport, we carry the foam for gun cases that keeps every firearm — and any other valuable gear — locked in place.