Eylar 13.37" Standard Gear Hard Case
External: 13.3" x 11.6" x 6"
Internal: 11.8" x 8.8" x 5.1"
Wt: 4 lbs.
FREE SHIPPING
- IP67 Waterproof, Dustproof, Shockproof — sealed gasket + pressure-equalization valve
- Capacity: DSLR + 2 lenses, mirrorless kits, DJI Mavic-class drones, 13" laptops
- 3-layer customizable foam — pluck-and-pull, solid pad, egg-crate top
- Heavy-duty polypropylene shell with rubber over-mold
- Dual press-and-pull latches with reinforced hinge
- TSA-approved lockable fittings for checked baggage
- Lifetime warranty + free US shipping
1/4" Padlock Hasps
Secure valuables inside this case by adding padlocks to the 1/4" padlock hasps.
Pressure Equalization Valve
Open the pressure valve to allow captured air pressure to equalize when traveling at different altitudes.
Foam Padding Included
Includes 2 layers of customizable cubed foam, 1 egg-crate top layer, and 1 bottom liner padding layer.
| SKU | SA00001 |
|---|---|
| UPC | 819889022047 |
| Case Pack | 4 |
| Internal Size (Inch) | 11.81" x 8.87" x 5.18" |
| External Size (Inch) | 13.37" x 11.62" x 6" |
| Weight | 4.000000 |
| Purge Value / Type | Yes / Manual |
| IP Rating | IP67 |
| Material | Polypropylene |
| Lockable Fittings | 2 Padlock Adaptable fittings, 1/4 inch size. |
| Waterproof | Yes |
| Dustproof | Yes |
| CA Residents | WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
| Warranty | Limited Lifetime |
13.37" Camera Hard Case for DSLR, Mirrorless, and Drones
The Eylar 13.37" camera hard case is sized for the majority of working camera kits: a full-frame DSLR with two lenses, a mirrorless body with extras, a DJI Mavic or Mini drone with controller and batteries, or a 13" laptop with peripherals. The hard shell camera case keeps your kit safe through airline holds, off-road runs, and rainy outdoor shoots.
IP67 Waterproof Sealed Shell
An O-ring gasket and pressure-equalization valve seal the case against dust, rain, and even brief submersion. Crushproof polypropylene takes drops, vehicle compression, and rough cargo handling without flexing onto your gear.
Customizable 3-Layer Foam Interior
The pluck-and-pull cubed foam top layer shapes to your camera, lenses, batteries, and accessories. A flat egg-crate pad over the pluck-and-pull layer dampens vibration; a solid bottom pad cushions impact. No third-party foam needed — it's all included.
TSA-Approved for Checked Travel
Lockable fittings meet TSA requirements for checked baggage. Add TSA-approved padlocks to secure your camera or drone for flights without compromising inspection access.
The Premium-Grade Camera Hard Case Standard
Sealed waterproof rating, crush-resistant polymer shell, lifetime warranty — every spec that pro photographers demand from a top-tier hard shell camera case, without the premium-brand price tag.
Specifications
- Material: Heavy-duty polypropylene with rubber over-mold
- Rating: IP67 waterproof, dustproof, shockproof
- Foam: 3-layer pluck-and-pull, solid pad, egg-crate top
- Locks: TSA-approved fittings (locks sold separately)
- Warranty: Limited Lifetime
More from This Collection
Customer Reviews
It feels really sturdy, and the pre cut foam is really convenient. Have not tried with rough weather, yet.
Really pleased, I would buy from this brand again.
Write a Review
Recommended Add-Ons
Your item was added to cart!
