Gun case foam inserts are pre-cut or pluck-and-pull foam liners designed to protect pistols, rifles, and bows inside hard cases. Eylar's gun case foam inserts — often searched as guncase foam — fit standard and oversize cases and are available in custom-cut configurations. Whether you need foam for a pistol case, a rifle insert, a foam insert for gun case upgrades, or a bow-case replacement, the right gun case foam insert is ready to drop in without waiting on custom orders.
Our pistol case foam and rifle inserts are stocked in standard sizes, protecting firearms from impact and vibration during storage and transport. The Ragar XP option resets and reuses without permanent cuts. Available in pistol, rifle, and universal sizes — so the right foam for gun cases is always in stock.
Custom Gun Case Foam — Pluck-and-Pull, Precut & Reusable Inserts
The right gun case foam turns a generic hard case into a custom-fit firearm vault. We offer three foam categories: factory pluck-and-pull foam for DIY shapers, custom precut foam inserts for gun cases for shooters who want to skip the cutting, and Ragar XP reconfigurable foam for those who change loadouts often. Whether you need a single gun case foam insert or a full set, every option ships ready to drop in — turning standard hard cases into true custom foam cases.
Pistol Case Foam & Rifle Case Foam Inserts
Our gun case foam inserts are engineered for both handguns and long guns. Pistol case foam is available in pluck-and-pull and custom precut formats sized for compact, full-size, and competition handguns — a proper foam for pistol case cushions the frame, barrel, and magazine without shifting during transport. Need a gun case foam insert for a long gun? From single-gun cradles to 5-gun Recon Rack EVA inserts, our rifle case foam ships sized for standard rifle-case interior dimensions. For secure at-home storage, gun safe foam strips and pads keep every firearm cushioned and scratch-free. See our dedicated pistol cases and rifle cases pages for case+foam bundles.
Vault Bow Case Inserts — Replacement & Custom Fit
Looking for a vault bow case insert replacement? Eylar's pre-scored pluck-and-pull foam sheets are sized to fit vault-style bow cases, letting you press out individual cubes to match your compound bow's exact profile — limbs, cams, riser, and sight — without any cutting tools. Our vault bow case foam is available in single-layer base pads and multi-layer sets so you can dial in the depth for low-profile builds or maximum protection of accessories. The foam density is tuned to absorb transport shock and eliminate rattling, whether you're driving to the range or checking your bow case at the gate.
These foam inserts for cases work across vault-style hard cases and use the same pluck-and-pull system as our gun case foam — one format, every firearm and archery application. If your current bow case foam is compressed or torn, dropping in a fresh vault bow case insert restores a like-new fit in minutes. Stock dimensions cover the most common vault bow case interiors; check the product listings for exact measurements before ordering.
- Pre-scored pluck-and-pull polyethylene foam — no cutting tools required
- Sized for vault-style bow case interiors — check each listing for exact measurements
- Single-layer base pads and multi-layer sets for adjustable depth
- Density tuned to absorb transport shock and eliminate rattling
Replacement Foam for Rifle Cases — How It Works
Replacement foam for a rifle case is a drop-in polyethylene insert matched to your case's interior dimensions. Measure the interior length, width, and depth, lift out the old foam, and set the new pluck-and-pull insert in place — no adhesive required. Pre-scored cubes let you press out a custom shape for your rifle, magazines, and optics in minutes.
Gun Case Foam FAQs
How do I replace foam in a gun case?
Measure your case's interior length, width, and depth, lift out the old foam, and drop in a matching replacement insert. Pluck-and-pull replacement gun case foam is pre-scored, so you simply press out cubes to fit your firearm — no glue or cutting tools needed.
What foam is best for a pistol case?
Closed-cell polyethylene pluck-and-pull foam is best for a pistol case. It holds its shape under repeated use, resists moisture, and cushions the frame, barrel, and magazines. A foam pistol case setup with a solid base pad underneath adds an extra layer of impact protection.
How do I cut foam in a gun case?
With pre-scored pluck-and-pull foam you don't need to cut at all — trace your firearm on the surface, then press out cubes along the score lines. For solid sheets, an electric carving knife produces the cleanest edges.
Is hard case foam universal?
Hard case foam — sometimes searched as case hard foam — is not one-size-fits-all: match the insert to your case's interior dimensions. Our polyethylene inserts come in pistol, rifle, bow, and universal sizes, and every product listing states its exact measurements.