XXXL 57" Heavy Transport Roller Rifle Hard Case Waterproof Shockproof
External: 57.4" x 18.4" x 11.2"
Internal: 54.5" x 15.5" x 8.6"
Wt: 37 lbs.
$469.99
FREE SHIPPING
Designed to secure 2 -3 rifles or combination with optics and gear. IP67 Waterproof protection for up to 1 meter fully submerged with a rubber gasket lining. Stackable design allows for secure multi-case transport. Includes 4 layers of foam made of 1 fully customizable pull & pluck cubed foam layer, 1 solid foam layer, 1 solid bottom pad foam layer and 1 layer of egg-crate foam padding. Meets TSA Requirements, Two padlock adaptable fittings allow for secure storage at home or on the go. Include external clear document case. Travel roller case with pressure equalization valve. Crushproof and Waterproof. Includes a limited lifetime warranty.



1/4" Padlock Hasps
Secure valuables inside this case by adding padlocks to the 1/4" padlock hasps.
Pressure Equalization Valve
Open the pressure valve to allow captured air pressure to equalize when traveling at different altitudes.
Foam Padding Included
Includes 2 layers of customizable cubed foam, 1 egg-crate top layer, and 1 bottom liner padding layer.
| SKU | SA00027 |
|---|---|
| UPC | 850013177912 |
| Case Pack | 1 |
| Internal Size (Inch) | 54.58" x 15.58" x 8.63" |
| External Size (Inch) | 57.42" x 18.48" x 11.23" |
| Weight | 37.000000 |
| Purge Value / Type | Yes / Manual |
| IP Rating | IP67 |
| Material | Polypropylene |
| Lockable Fittings | Meets TSA requirements with lockable hasps and fittings. |
| Waterproof | Yes |
| Dustproof | Yes |
| CA Residents | WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
| Warranty | Limited Lifetime |
The Eylar 57-inch Mil-Spec elite protective long rifle hard case is designed to secure your rifles for transport or storage. Two low profile, reinforced solid roller wheels allow quick and effortless transport of the heaviest loads. Check rifles safely with TSA on flights as we have designed this case to meet TSA—s strict requirements for firearm transport on airplanes in the USA (TSA luggage lock fittings). Two folding, crushproof drag handles for rolling and 2 person hand carrying. Injection molded from reinforced high pressure polypropylene plastic that is waterproof and crushproof. Adaptive pressure equalization valve to release built up air pressure allowing for atmospheric compensation when transported at high / low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed applying pressure to a rubber gasket that is molded to the perimeter of the case. IP67 Fully submerged waterproof protection for up to 1 meter. Resistant to extreme heat and freezing cold with a working temperature range of -20" F (-29" C) to 140" F (60" C). This hard gun case comes with 4 layers of foam designed to keep your valuables and rifles firmly in place, 1 fully customizable pull & pluck cubed foam layers, 1 solid foam layer, 1 solid bottom pad layer and 1 layer of egg-crate foam padding for the lid. Six press & pull snap latches secure the full length of the 57-inch long case. Fit up to 3 long rifles securely with a deep inner storage area of : 54.58" x 15.58" x 8.63" inches. Two pad lock adaptable fittings allow for secure storage at home or on the go. Featuring edge to edge crushproof protection up to 3,000 lbs of directly dispersed weight. Uniform ridges on the top and bottom create a in line stackable design for multi case transport. Built to last Eylar cases are backed by a limited lifetime warranty. — — External: 57.42" x 18.48" x 11.23" Internal 54.58" x 15.58" x 8.63" Weighs 22.1 lbs Weighs 36 lbs - Designed to secure 2 -3 rifles or combination with optics and gear. IP67 Waterproof protection for up to 1 meter fully submerged with a rubber gasket lining. Stackable design allows for secure multi-case transport. Includes 4 layers of foam made of 1 fully customizable pull & pluck cubed foam layer, 1 solid foam layer, 1 solid bottom pad foam layer and 1 layer of egg-crate foam padding. Meets TSA Requirements, Two padlock adaptable fittings allow for secure storage at home or on the go. Include external clear document case. Travel roller case with pressure equalization valve. Crushproof and Waterproof. Includes a limited lifetime warranty.
Customer Reviews
★
★
★
★
★
Exceeds expectations
The roller rifle case is robust and offers unmatched protection. The locking features and pressure valve are thoughtful additions that enhance its usability. It's an essential for those with valuable equipment to protect.
★
★
★
★
★
Perfect for heavy-duty use
This case is perfect for anyone needing secure, heavy-duty protection. The wheels and handles withstand rough handling, and the waterproof seal keeps everything dry. Definitely worth the investment for serious use.
★
★
★
★
★
Good but cumbersome
The protection is outstanding, and the foam layers are superb. However, the case is quite heavy and difficult to manage alone. It's not ideal for those needing something more portable.
Write a Review
Write Your Own Review
Recommended Add-Ons
Your item was added to cart!
✔ Add-on added!
Eylar TSA Approved 3 Digit Combination Lock with Cable, Durable Single Shaft Bolt Design for Camera and Gear Cases (Single Pack)
$14.99
Eylar TSA Approved 3 Digit Combination Lock with Cable, Durable Single Shaft Bolt Design for Camera and Gear Cases (2 Pack)
$24.99