53" Hard Roller Rifle Case w/ Retro Controller UV Print and Red/Black RAGAR 50.5" Foam
External: 53" x 16" x 6.1"
Internal: 50.5" x 13.5" x 5.2"
Wt: 24.2 lbs.
FREE SHIPPING
- Full-color UV-printed exterior — photo-quality custom design, scratch-resistant
- 53" hard rifle case — fits scoped rifles, AR platforms, precision long guns
- IP67 Waterproof, Dustproof, Shockproof — sealed shell with pressure valve
- Customizable foam interior
- Heavy-duty polypropylene with rubber over-mold
- TSA-approved lockable fittings for air travel
- Lifetime warranty on the case + free US shipping
| SKU | SA00015-WHT-RG-XP-RED-UV-CONTROLLER |
|---|---|
| Case Pack | 1 |
| Color | White |
| Internal Size (Inch) | 50.5" x 13.5" x 5.25" |
| External Size (Inch) | 53" x 16" x 6.12" |
| Weight | 24.200000 |
| Purge Value / Type | Yes / Manual |
| Foam Layers / Type | One 50.5" x 13.5" x 2" RAGAR Reusable Foam Layer, 1 Solid Bottom Pad, 1 Convoluted Lid Foam |
| IP Rating | IP67 |
| Material | Polypropylene |
| Numbers of Latches / Type | 4 |
| Lockable Fittings | 2 |
| Waterproof | Yes |
| Dustproof | Yes |
| CA Residents | WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
53" UV-Printed Rifle Case with Custom Design
This 53" custom rifle case features a full-color UV-cured print across the exterior — photo-quality artwork that won't peel, fade, or scratch off like vinyl decals. Each design is locked into a scratch-resistant cured layer. Personality on the outside, IP67-rated protection on the inside.
UV Printing — Photo-Quality Custom Branding
UV-cured ink reproduces full-color logos, gradients, photographs, and complex artwork directly on the case shell. Ideal for collector editions, branded gear, hunting tributes, or one-of-a-kind personal cases.
IP67 Waterproof Sealed Shell
Underneath the printed exterior, the case is a standard Eylar IP67 sealed shell: O-ring gasket, pressure-equalization valve, polypropylene with rubber over-mold. The print doesn't compromise the protection.
Customizable Foam, TSA-Approved
Interior foam shapes around your specific kit. Lockable fittings meet TSA requirements for air travel.
Premium-Grade Custom Rifle Case
Photo-quality personalization on a working sealed case — built for shooters and collectors who want both protection and personality.
Specifications
- Print: Full-color UV-cured, scratch-resistant
- Material: Polypropylene with rubber over-mold
- Rating: IP67 waterproof, dustproof, shockproof
- Foam: Customizable
- Locks: TSA-approved fittings
- Warranty: Limited Lifetime on the case
More from This Collection
Customer Reviews
There are no customer reviews yet.
Write a Review
Recommended Add-Ons
Your item was added to cart!
