Eylar 20-inch Large Hard Camera & Drone Case with Padded Dividers and Lid Organizer
Ex: 19.78" x 15.77" x 7.41"
In: 18.06" x 12.89" x 6.72"
Wt: 9.5 lbs.
Bring your camera or compact drone setup together in a spacious 20-inch hard case.
- Adjustable padded dividers create separate compartments around the kit you carry.
- Four zippered mesh lid pockets organize cables, cards and smaller accessories.
- Polypropylene shell with four latches and IP67 protection when properly closed and latched.
- Folding carry handle, manual pressure valve and two padlock fittings. Exterior: 19.78 × 15.77 × 7.41 inches.
Includes the case, padded divider set and lid organizer. Check equipment dimensions, your divider layout and lid clearance for fit. Equipment and padlocks are not included.

Eylar 20-inch camera & drone case
Room for the whole shoot.
Make space for your next location. A polypropylene hard shell, adjustable padded dividers and four mesh lid pockets give your chosen kit an organized place to travel.
Camera equipment and accessories shown are not included.
Explore the details
Build the layout around your kit.
Reposition the gray padded dividers for camera bodies, lenses and accessories. Keep cables and card cases visible in four zippered mesh lid pockets.
Equipment shown is not included. Fit depends on your equipment and divider layout.

Adjustable padded dividers

Four zippered mesh pockets

Fabric-lined padded insert

Camera kit to flight kit
Change the plan. Keep the case.
Create a layout for a compact folding drone, controller and flight essentials. Separate padded bays and lid pockets give each part a place of its own.
Fit varies by model, folded dimensions and divider layout. Drone and accessories shown are not included.

Protection between locations
From the studio to the next location.
The polypropylene shell and gasket provide IP67 water and dust protection when properly closed and latched. Two front and two side latches close the shell.
Carry it by the folding handle, add your own padlocks at the two fittings, and use the manual valve to equalize pressure before opening after altitude changes. Padlocks sold separately.
See it in action
See the case arranged for camera and drone gear, with adjustable padded dividers and four zippered mesh pockets.
Outdoor drone and indoor camera arrangements, followed by close-ups of the adjustable padded dividers and four zippered mesh pockets.
Video transcript
From your next flight to your next shoot, keep your gear organized with Eylar. This twenty-inch hard camera and drone case includes adjustable padded dividers and a four-pocket lid organizer. Pack your essentials, and get ready for what’s next.
Specifications & fit
Know your space. Plan your setup.
- Exterior (L x W x H)
- 19.78 x 15.77 x 7.41 inches
- Interior shell (L x W x H)
- 18.06 x 12.89 x 6.72 inches before the padded insert, dividers and lid organizer.
- Equipment fit
- Padding, dividers and the organizer reduce usable space, including clearance beneath the lid. Check your complete setup against the configured compartments. Fit depends on equipment dimensions and layout; model-specific fit has not been verified.
- Case weight
- 9.5 lb
- Shell and color
- Black polypropylene
- Latches
- Four total: two front latches and two side latches.
- Carry and closure features
- Folding carry handle, two padlock fittings and a manual pressure equalization valve. Padlocks sold separately.
- Included
- Black hard case, gray padded insert with adjustable divider set, and four-pocket mesh lid organizer with red zippers.
- Not included
- Camera equipment, drones, controllers, batteries and other accessories shown. Padlocks are sold separately.
- Model / SKU
- SA00002-AC11
Additional product information
| SKU | SA00002-AC11 |
|---|---|
| Weight | 9.500000 |
| UPC | 810161055821 |
| Case Pack | 1 |
| Color | Black |
| Internal Size (Inch) | 18.06" x 12.89" x 6.72" |
| Case Length | 11" - 20" |
| External Size (Inch) | 19.78" x 15.77" x 7.41" |
| Purge Value / Type | Yes / Manual |
| Foam Layers / Type | Adjustable Padded Divider Set & Four-Pocket Mesh Lid Organizer |
| IP Rating | IP67 |
| Material | Polypropylene |
| Numbers of Latches / Type | 4 Snap Latches |
| Lockable Fittings | Padlock Hasps; Padlocks Sold Separately |
| Waterproof | Yes |
| Dustproof | Yes |
| CA Residents | WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
| Warranty | Limited Lifetime |
Customer Reviews
Write a Review
Recommended Add-Ons
Your item was added to cart!










