10.62" Small Gear, Equipment, Camera Hard Case with Custom Engraved Plate
Ex: 10.62" x 9.68" x 4.87"
In: 9.25" x 7.12" x 4.12"
Wt: 4 lbs.
$44.99 MSRP $73.99
Custom CNC-cut foam
Foam cut exactly to your gear
Design it online in about 2 minutes. We cut it to your layout and ship it inside this case.
7,000+ gear shapesShips in 5–7 business days
starting at
Dimensions Includes 3 layers of foam; 1egg-crate top liner layer, 1 pull & pluck customizable layer, 1 bottom pad solid layer. IP67 Waterproof & Dust Proof: Rubber gasket lines the rim of the case, when latched closed creates a waterproof seal. Innovative pressure equalization valve allows the case to quickly equalize to different air pressures. Two padlock adaptable hasps. Eylar waterproof hard cases are backed by a limited lifetime warranty.
We found other products you might like!
No Realistic Photos
The engraving process requires images to be solid colors for printing onto the plate.
No Low Resolution Logos
No photos with low-resolution will be accepted. Low-resolution images will delay the engraving process.
High Resolution Logos
We only accept high-resolution images in solid colors for better results. Once design is approved, engraving will ordinarily take 1 - 2 days.
| SKU | SA00022-CL |
|---|---|
| Weight | 4.000000 |
| Case Pack | 8 |
| Internal Size (Inch) | 9.25" x 7.12" x 4.12" |
| Case Length | 11" - 20" |
| External Size (Inch) | 10.62" x 9.68" x 4.87" |
| Purge Value / Type | Yes / Manual |
| IP Rating | IP67 |
| Material | Polypropylene |
| Lockable Fittings | Meets TSA requirements with lockable hasps and fittings. |
| Waterproof | Yes |
| Dustproof | Yes |
| CA Residents | WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
| Warranty | Limited Lifetime |
This small 10.62" hard waterproof case is great for storing cameras, electronics and other valuables. This case includes three layers of foam: one egg-crate top liner layer, one pull & pluck customizable layer and one bottom pad solid layer. A rubber gasket lines the rim of the case, when latched closed by the two pull and snap latches creates a waterproof seal. Two padlock hasps and an innovative pressure valve allows this case to be secured with padlocks and meet TSA requirements for travel. Dimensions External: 10.62" x 9.68" x 4.87" Inside: 9.25" x 7.12" x 4.12" Includes 3 layers of foam; 1egg-crate top liner layer, 1 pull & pluck customizable layer, 1 bottom pad solid layer. IP67 Waterproof & Dust Proof: Rubber gasket lines the rim of the case, when latched closed creates a waterproof seal. Innovative pressure equalization valve allows the case to quickly equalize to different air pressures. Two padlock adaptable hasps. Eylar waterproof hard cases are backed by a limited lifetime warranty.
More from This Collection
Customer Reviews
★ ★ ★ ★ ★
Functional, but limited space The case is solid and protects well against elements and impacts. However, the space inside is quite limited if you have more than a couple of small items. It's perfect for very compact gear but not suitable for larger camera setups.
★ ★ ★ ★ ★
Sturdy but compact Very impressed with the build quality of this case! It holds my camera and a few essential accessories securely. The waterproof and dustproof features are reliable, though it's a bit smaller than I anticipated. Great for day trips or as a carry-on.
★ ★ ★ ★ ★
Perfect for sensitive equipment his case is a must-have for anyone needing secure, compact storage for delicate items. It's completely waterproof and shockproof, providing exceptional protection. The customizable foam inserts make it easy to tailor the fit for different items, ensuring everything stays in place.
Write a Review
Write Your Own Review
Recommended Add-Ons
Your item was added to cart!
✔ Add-on added!
