Large 22" Waterproof Laptop Hard Case for 17" Laptops, Cameras & Tools: With Foam
Ex: 21.62" x 17.25" x 4.87"
In: 18.87" x 13.12" x 3.81"
Wt: 8.6 lbs.
- IP67 Waterproof, Dustproof and Shockproof protection.
- Includes 1 fully customizable pull & pluck cubed foam layer, 1 solid foam layer and 1 layer of egg-crate foam padding.
- Fits most full-size laptops with space for power cables and accessories.
- Polypropylene Body, ABS Latches & Handles, Steel Pins.
- Pressure equalization valve.
- Limited Lifetime Warranty.
4 Latches
Includes 4 latches for maximum seal.
Pressure Equalization Valve
Open the pressure valve to allow captured air pressure to equalize when traveling at different altitudes.
Rubber Gasket
Rubber gasket lines the rim of the case creating a waterproof seal.
| SKU | SA00024 |
|---|---|
| Weight | 8.600000 |
| UPC | 810079680092 |
| Case Pack | 4 |
| Internal Size (Inch) | 18.87" x 13.12" x 3.81" |
| Case Length | 21" - 30" |
| External Size (Inch) | 21.62" x 17.25" x 4.87" |
| Purge Value / Type | Yes / Manual |
| IP Rating | IP67 |
| Material | Polypropylene |
| Lockable Fittings | Yes |
| Waterproof | Yes |
| Dustproof | Yes |
| CA Residents | WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
| Warranty | Limited Lifetime |
Protect your sensitive and valuable equipment. These are cases designed to resist and persevere against the elements. These cases are made with an innovative pressure equalization valve, a watertight seal and quick access ABS latches. Reinforced high pressure polypropylene plastic. This roller case is great for storing cameras, electronics, tools, and equipment. Includes 1 layer of pull and pluck foam, 1 bottom foam and 1 top egg crate foam layer.
- External Dimensions: 21.62" x 17.25" x 4.87" Internal Dimensions: 18.87" x 13.12" x 3.81".
- IP67 Waterproof, Dustproof and Shockproof protection.
- Includes 1 fully customizable pull & pluck cubed foam layer, 1 solid foam layer and 1 layer of egg-crate foam padding.
- Fits most full-size laptops with space for power cables and accessories.
- Polypropylene Body, ABS Latches & Handles, Steel Pins.
- Pressure equalization valve.
- Limited Lifetime Warranty.
Which laptops fit this 22" laptop hard case
Fit is set by the interior: 18.87" x 13.12" x 3.81". A 17.3" laptop measures roughly 15.9" x 10.8" and lies flat with about 3" to spare at the end for the power brick and a mouse; 16" and 15.6" machines leave even more room. The 3.81" depth clears any current laptop, gaming models included, with foam above and below it. Cut the pluck-and-pull layer to the laptop's footprint, leave a finger notch at one end, and the case becomes a waterproof laptop hard case that also carries a camera body or a hand-tool kit in the remaining foam.
| Screen size | Typical footprint | Fits this case? |
|---|---|---|
| 13"–14" | up to 12.5" x 8.8" | Yes, with room for charger, mouse and a drive |
| 15.6"–16" | up to 14.2" x 9.9" | Yes, with room for the charger |
| 17"–17.3" | up to 15.9" x 10.8" | Yes; confirm your model is under 13" deep |
Unlike a laptop sleeve, this is a rigid IP67 shell: it will not crush in an overhead bin, it keeps rain and dust out on a job site, and the hasps take padlocks for TSA checked travel. See all laptop hard cases, or the 20" version for 15.6" and 16" machines.
More from This Collection
Customer Reviews
There are no customer reviews yet.
Write a Review
Recommended Add-Ons
Your item was added to cart!
