Medium 20" Waterproof Laptop Hard Case for 15.6"–16" Laptops, Cameras & Tools: With Foam
Ex: 19.87" x 13.93" x 4.68"
In: 17.75" x 11.37" x 4.12"
Wt: 7.1 lbs.
Custom CNC-cut foam
Foam cut exactly to your gear
Design it online in about 2 minutes. We cut it to your layout and ship it inside this case.
- IP67 Waterproof, Dustproof and Shockproof protection.
- Includes 1 fully customizable pull & pluck cubed foam layer, 1 solid foam layer and 1 layer of egg-crate foam padding.
- Fits most full-size laptops with space for power cables and accessories.
- Polypropylene Body, ABS Latches & Handles, Steel Pins.
- Pressure equalization valve.
- Limited Lifetime Warranty.
| SKU | SA00025 |
|---|---|
| Weight | 7.100000 |
| UPC | 810079680122 |
| Case Pack | 4 |
| Internal Size (Inch) | 17.75" x 11.37" x 4.12" |
| Case Length | 11" - 20" |
| External Size (Inch) | 19.87" x 13.93" x 4.68" |
| Purge Value / Type | Yes / Manual |
| IP Rating | IP67 |
| Material | Polypropylene |
| Lockable Fittings | Yes |
| Waterproof | Yes |
| Dustproof | Yes |
| CA Residents | WARNING. This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (“DEHP”), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. |
| Warranty | Limited Lifetime |
Protect your sensitive and valuable equipment. These are cases designed to resist and persevere against the elements. These cases are made with an innovative pressure equalization valve, a watertight seal and quick access ABS latches. Reinforced high pressure polypropylene plastic. This roller case is great for storing cameras, electronics, tools, and equipment. Includes 1 layer of pull and pluck foam, 1 bottom foam and 1 top egg crate foam layer.
- External Dimensions: 19.87" x 13.93" x 4.68" Internal Dimensions: 17.75" x 11.37" x 4.12".
- IP67 Waterproof, Dustproof and Shockproof protection.
- Includes 1 fully customizable pull & pluck cubed foam layer, 1 solid foam layer and 1 layer of egg-crate foam padding.
- Fits most full-size laptops with space for power cables and accessories.
- Polypropylene Body, ABS Latches & Handles, Steel Pins.
- Pressure equalization valve.
- Limited Lifetime Warranty.
Which laptops fit this 20" laptop hard case
Fit is set by the interior: 17.75" x 11.37" x 4.12". A 15.6" laptop measures roughly 14.2" x 9.8" and a 16" laptop about 14.1" x 9.9", so either lies flat with about 3.5" to spare at the end for the power brick and a mouse. A 17.3" laptop (about 15.9" x 10.8") fits in length but has only half an inch of width to spare, so measure your exact model — most fit, thick gaming chassis may not. The 4.12" depth clears any current laptop with foam above and below it. Cut the pluck-and-pull layer to the footprint and the same case carries a camera body or a compact tool kit beside the laptop.
| Screen size | Typical footprint | Fits this case? |
|---|---|---|
| 13"–14" | up to 12.5" x 8.8" | Yes, with room for charger, mouse and a drive |
| 15.6"–16" | up to 14.2" x 9.9" | Yes, with room for the charger |
| 17"–17.3" | up to 15.9" x 10.8" | Length yes, width tight — confirm your model is under 11" deep |
Unlike a laptop sleeve, this is a rigid IP67 shell: it will not crush in an overhead bin, it keeps rain and dust out on a job site, and the hasps take padlocks for TSA checked travel. See all laptop hard cases, or step up to the 22" version for 17" laptops with room to spare.
More from This Collection
Customer Reviews
Write a Review
Recommended Add-Ons
Your item was added to cart!
