Pink Rifle Case: Sizes, TSA Rules and How to Fit the Foam

A pink rifle case from Eylar® is the same hard case as the black one — only the shell color changes. Pink is stocked in the 38″ and 44″ roller rifle cases and the 22″ carry-on. All three have IP67 waterproof polypropylene bodies, foam interiors and padlock-ready fittings; the rifle cases meet TSA requirements for checked firearms.

Which Eylar cases come in pink?

Pink is a stocked exterior color across the main travel cases, not a one-off. Here is what you can get and what fits in each shell.

If pink is not stocked in the size you need, every hard rifle case in the line is available in black with the same interior dimensions.

The measurement that matters is the interior, not the model name. A 44″ case gives you 42 inches of usable length; a 38″ case gives you 35.8 inches. Measure your rifle from the muzzle to the rearmost point of the buttstock with the stock collapsed or folded, then add about an inch of foam at each end.

Each size comes two ways. You can order it with reusable RAGAR foam — the 38″ RAGAR rifle case or the 44″ RAGAR rifle case — or with the standard three-layer pick-and-pluck foam. The 44″ RAGAR build is the easier choice if you leave an optic mounted and expect to change it later.

Is a pink gun case any less protective than a black one?

No. The color is in the plastic; the structure underneath is identical. On the Eylar rifle cases that means:

• IP67 waterproof and dustproof — sealed by a rubber gasket lining, rated for full submersion to one meter.
• Polypropylene shell that is shockproof, at 16.8 lb (38″) or 20.5 lb (44″) empty.
• Two padlock-adaptable fittings so you can lock the case for checked travel or for storage at home.
• Pressure-equalization valve, which lets the case vent as cabin or elevation pressure changes so the lid isn’t fighting you when you open it.
• Wheels and carry handles on the roller cases, so a loaded case rolls through a terminal or across a gravel lot instead of being lugged.

There is one real, practical advantage to pink: it is easy to spot. Black cases all look alike on an oversize baggage belt. A bright shell is yours from thirty feet away, and it is harder for someone to quietly walk off with it in a crowded parking lot.

Can you fly with a pink rifle case?

Yes. Airlines and TSA care about the case’s construction and locks, not its color. Eylar’s rifle cases meet TSA requirements for checked firearms, but the case only does half the job — the rest is procedure.

Checklist before you leave for the airport:

1. Unload the firearm and confirm the chamber is clear. Have a second person or a second look verify it.
2. Seat the firearm in the foam so nothing shifts. A rifle that can slide inside the case is a rifle that arrives with a scratched stock or a knocked optic.
3. Pack ammunition the way your airline requires — generally in its own factory box or a purpose-built ammo container, not loose in the foam.
4. Lock both hasps with padlocks that only you hold the key to. Checked firearm cases are locked by the owner.
5. Declare the firearm at the counter and fill out the declaration card. Build in extra time; this is never a two-minute stop.
6. Confirm the destination’s rules before you fly. States, countries and individual airlines differ.

Rules change, so verify current airline and TSA policy before every trip. The hardware side stays constant: a hard-sided, lockable, waterproof case like the 44″ tactical roller rifle case is what the counter agent is looking for.

Will a pink shotgun case fit my gun?

Usually — it comes down to length. Most field and tactical shotguns fit the 44″ case comfortably inside its 42″ interior. Longer barrels with extended magazine tubes can push past that, and if yours does, break the gun down: pull the barrel and lay the two halves side by side in the foam.

The 38″ case works for a youth-stock shotgun, a shorter defensive shotgun, or a shotgun broken into two pieces. Its interior is also wider at 13.8 inches, which gives you room to lay a second barrel or a set of chokes and tools beside the receiver.

Depth is the number people forget. The 38″ case has 5.75 inches of interior depth and the 44″ has 5.25 inches — enough for a rifle with a mounted scope in most setups. Measure from the bottom of the magazine to the top of the turret or riser before you commit. If your optic stack is tall, plan to lay the rifle on its side in the foam.

How do you fit the foam to a rifle in a pink case?

You have two interior options, and they lead to very different experiences over the life of the case.

Pick-and-pluck foam ships as three layers: an egg-crate layer in the lid, a cubed layer you pull apart to shape the cavity, and a solid base layer. It’s simple and it works. The catch is that once you pluck a cavity, it’s gone. Change your stock, add a can, or swap rifles and you’re buying new foam.

RAGAR foam is Eylar’s reusable system, made from XP crosslinked closed-cell foam and covered by U.S. Patent No. 12,358,707. The blocks lift out and drop back in, so the cavity is a layout, not a permanent cut. Change optics in the spring and you rebuild the nest in a few minutes instead of replacing the insert.

A clean layout, step by step:

1. Lay the unloaded rifle on top of the foam exactly where you want it to sit, muzzle away from the handle end.
2. Mark the outline — the widest points are usually the magazine well, the optic and the buttpad.
3. Remove foam a little at a time. Tight beats loose; the rifle should need light pressure to seat.
4. Check that nothing touches the walls of the case. You want foam between every hard part and the shell.
5. Close the lid. The egg-crate layer should press down on the rifle so it cannot lift or rattle. If the lid closes with no resistance, add a layer.
6. Shake the closed case. Any knock you hear is a gap to fill.

If you’re replacing worn foam in a case you already own, measure the interior length, width and depth first — the guide to measuring a case for replacement foam shows where to take each number.

Is there a pink camo rifle case?

A lot of people search for pink camo, so here is the straight answer: Eylar’s pink is a solid pink shell, not a camo print. Patterns and graphics come from UV printing rather than a stock color. Eylar does UV-printed custom cases and laser-engraved ID plates, and the Tactical Skull roller rifle case shows what a printed shell looks like in production.

Solid pink already does the job camo is usually bought for on a case — identification. Camo makes a case harder to find in the woods, not easier. Save the pattern for the blind and keep the case loud.

To compare sizes and stocked colors in one place, browse the rifle case lineup and sort by interior length before you pick a color. Eylar.com ships free within the US and accepts returns for 30 days, so if the interior comes up short you can send it back and size up.

FAQ

Does Eylar make a pink pistol case?

The 22″ carry-on roller case comes in pink and is the closest fit for handguns. Its 19.75″ x 11″ x 7.6″ interior holds a handgun or two plus optics, ammo boxes and gear, and the reconfigurable RAGAR foam lets you build separate pockets for each item. It is IP67-rated and built to TSA standards.

What size pink rifle case do I need for an AR with an optic?

With the stock collapsed, most ARs fit the 38″ case’s 35.8″ interior. If your rifle has a fixed stock, a long handguard, or a suppressor you want to store mounted, step up to the 44″ case and its 42″ interior. Check optic height against the 5.25″–5.75″ interior depth before ordering.

Can a pink rifle case hold two rifles?

Yes. The 38″ and 44″ cases are designed to secure two rifles, or one rifle with optics and gear, depending on how you lay out the foam. Two rifles ride best nose-to-tail with a foam divider between them so receivers and scopes never touch.